開閉件工程師崗位職責（2篇范文）

發布時間：2023-10-14 07:00:10 查看人數：21

目錄
第1篇開閉件工程師崗位職責第2篇車身開閉件工程師崗位職責

開閉件工程師崗位職責

第1篇開閉件工程師崗位職責

開閉件工程師上海伊狄達汽車技術服務有限公司上海伊狄達汽車技術服務有限公司,伊狄達 main responsibilities主要職責:

1. be responsible for biw & closure 2d/3d part design, according to suggestion from cae/craft analysis department to modify product structure and craft;

負責biw/隔板的2d/3d部分的設計,根據cae/工藝分析部門給出的建議去修改產品結構和工藝;

2. be responsible for layout &performance design, checking and making proposals about biw system accessories and closure system, hinge ,check arm , sealing system, latch system, regulator, gas spring and other accessories;

負責biw系統附件及隔板系統、鉸鏈、止回臂、密封系統、鎖止系統、調節器、氣彈簧等附件的布置及性能設計、校核及建議;

3. be responsible for preparation, review the bom, bop, typical section, gd&t, parts description, design report and other technical documents;

負責bom,bop,典型斷面,gd&t,零件說明,技術報告等技術文件的編制、審核;

4. design , checking and motion analysis by using catia or ug software and etc.;

使用catia或者ug等軟件去設計,校對以及動作分析;

5. design and release closure parts;

設計和發布隔板的部分;

6. be responsible for tracking and solving prototype vehicle and related parts manufacturing, trial production& process validation, production preparation and pre-pilot of the on-site technical support service.

負責跟蹤解決原型車及相關零部件的制造、試制和工藝驗證、生產準備和現場技術支持服務的預試。

job requirements職業要求:

1. vehicle, or mechanical major etc. with college degree or above, above 5 years of closure design experience in large or medium auto enterprises, design company preferred;

大專及以上車輛、機械等相關專業,五年以上中大型企業隔板設計經驗,設計公司優先;

2. work experience of the tailgate and active bonnet system preferred;

有尾門和主動閥蓋系統工作經驗者優先;

3. knowledge of the main constrains of the process: stamping / welding /painting/ assembly line;

了解沖壓/焊接/噴漆/裝配線工藝的主要約束條件;

4. proficient in catia or ug etc.;

熟練使用catia或ug等軟件;

5. good computer skills and english level;

良好的計算機技能和英語水平;

6. open mind and team work with people from different cultures,work seriously and responsibly;

思維開放并且可以和來自不同文化的人團隊協作,工作認真負責;

7. able to travel on short notice and work outside for business related travel.